Sản phẩm nằm trong danh mục:
Microphone -> Micro không dây -> SHURE
SHURE -> Micro không dây
SHURE -> ULX-D
Bộ micro không dây Shure ULXD24D/SM58
(Bao gồm: 02 Bộ phát ULX2/SM58 & bộ nhận dual kỹ thuật số ULXD4D)
Tính năng của sản phẩm: Bộ micro không dây Shure ULXD24D/SM58
ULX2 Handheld Transmitter
- 8-9 Hour Battery Life
- Power: On/Off Switch, Battery
- LED-Green When ON, Red When Battery Low
- Three-segment Battery Power Icon
- PEAK Icon-Appears When Audio Signal Overloads
- Group/Channel Displays
- SET Button for Saving Settings
- Adjustable Audio Gain Control
- Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
- 4-pin Mini Connector
- Battery Cover Unscrews to Expose Battery and Gain Control
- 9V Battery Included
SM58 Vocal Microphone
- Frequency response tailored for vocals, with brightened midrange and bass rolloff
- Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
- Pneumatic shock-mount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant stand adapter which rotates 180 degrees
- Legendary Shure quality, ruggedness and reliability
- Cardioid (unidirectional) dynamic
- Frequency response: 50 to 15,000 Hz
Thông số kỹ thuật của sản phẩm: Bộ micro không dây Shure ULXD24D/SM58
Maximum Cable Length Supported | 100 m (328 ft), Dual-Port Ethernet |
Network Addressing Capability | DHCP or Manual IP address |
Network Interface | 10/100 Mbps; 1Gbps; Dante Digital Audio; Dual-Port Ethernet |
Phantom Power Protection | Yes, audio output |
Pad | MIC/LINE switch: 30 dB, audio output |
Full Scale Output | LINE setting: +18 dBV, audio output MIC setting: −12 dBV, audio output |
Configuration | Unbalanced; passive, cascade output XLR: balanced (1=ground, 2=audio +, 3=audio −), audio output |
Gain Range | −18 to +42 dB in 1 dB steps (plus mute setting), audio output |
Insertion Loss | 0 dB, cascade output |
Impedance | 50 Ω, RF input 50 Ω, cascade output 100 Ω, audio output |
Connector Type | BNC, RF input BNC (for connection of one additional receiver in the same band), cascade output |
Bias Voltage(s) | 12 to 13 V DC, 150 mA maximum, per antenna, switchable on-off, RF input |
Spurious Rejection | >80 dB, typical, RF input |
Power Requirements | 100 to 240 V AC, 50-60 Hz, 0.26 A max. |
Housing | Steel; extruded aluminum |
Weight | 7.4 lb (3.36 kg), without antennas |
Dimensions | 1.7 x 19 x 10.8" (44 x 482 x 274 mm) |